CNC press brakes is a high-precision metal processing equipment. Safety regulations must be strictly followed during operation to avoid accidents due to improper operation or equipment failure.
Common safety operating regulations and accident prevention measures:
1. Safety preparation before operation
Be familiar with the equipment manual: Before operation, you should fully understand the working principle, various functions and safety warnings in the الفرامل الصحافة باستخدام الحاسب الآلي.
Check the equipment status: Before starting, check all parts of the press brakes to ensure that there is no looseness, wear or other safety hazards.
Check the electrical system: Ensure that the electrical circuit is not damaged or leaking, and the electrical control panel is working properly.
2. Personal safety protection
Wear appropriate personal protective equipment: Operators should wear protective glasses, protective gloves, hearing protectors, etc. to prevent metal chips, noise and possible mechanical injuries.
Avoid wearing loose clothing: Loose clothing or accessories may be caught by the machine, and inappropriate clothing should be avoided.
3. Safety precautions in equipment operation
Ensure that the workpiece is firmly fixed: Before operation, be sure to check and ensure that the workpiece is properly fixed to avoid sliding or shifting during the bending process.
Avoid hands near the bending area: When the machine is working, the operator must not place hands or body parts in the bending machine working area, especially between the mold and the slide.
Confirm that there are no obstacles before starting: Before starting the machine, the operator should confirm that there are no debris or unnecessary tools on the workbench and bending area to ensure smooth operation.
Follow the operating sequence: Work strictly in accordance with the operating procedures, and do not modify the bending parameters at will to ensure processing accuracy and safety.
4. Emergency stop and emergency treatment during operation
Emergency stop device: High precision CNC press brakes should be equipped with emergency stop device, in the event of failure or improper operation, the operator can quickly cut off the power supply and stop the machine operation.
Troubleshooting: When abnormal sound, vibration or abnormal operation occurs, the machine should be stopped immediately for inspection and troubleshooting. The operator shall not check or adjust the machine while it is running.
5. Training and operator qualifications
Regular training: Operators must undergo professional training and master the operating procedures, equipment maintenance, emergency treatment measures and other knowledge of CNC press brakes.
Ensure operator qualifications: Only certified and qualified personnel can operate CNC press brakes to ensure safe production.
6. Daily maintenance and inspection of equipment
Regular equipment inspection: Regularly inspect and maintain the press brakes, including the hydraulic system, electrical system, mechanical parts, etc., to ensure that the equipment is in good condition.
Clean the work area: Keep the area around the equipment clean, and remove metal chips and dust to prevent them from affecting the operation of the equipment or causing a fire.
Lubrication and maintenance: Lubricate the key components of the Automated Operation CNC press brakes (such as slide rails, molds, etc.) on time to reduce friction and extend the life of the equipment.
7. Accident prevention measures
Prevent pinching: During operation, ensure that all mechanical parts and molds do not get stuck or clamp the operator, especially when the mold is close to the working area.
Prevent electrical accidents: Regularly check the electrical circuits and equipment grounding system to avoid electrical accidents such as leakage and short circuit.
Avoid overload work: Do not overload the CNC press brakes, especially bending workpieces that exceed the rated capacity of the machine to avoid machine damage and safety hazards.
8. Accident emergency handling
Timely handle mechanical failures: If a machine failure is found, it should be stopped as soon as possible, and the maintenance personnel should be contacted for inspection and repair, and it should not be used again.
Rapidly call the police in case of an accident: If a safety accident occurs (such as personal injury, equipment damage, etc.), the emergency plan should be immediately activated, the police should be called, and emergency measures should be taken.
The safe operation of the high performance CNC press brakes is not only a technical requirement, but also a guarantee of the operator's life safety. By strictly abiding by the operating procedures, regularly maintaining the equipment, strengthening operator training, and taking effective preventive measures, accidents can be avoided to the greatest extent, ensuring the safety of the working environment and production efficiency.
